Location : Home > Consumer Product > Consumer SSD > mSATA
  • uploads/image/140821432164878.jpg

SSD mSATA MS800

mSATA SSD
Interface standard: Serial ATA Revision 3.0, 6Gbps Performance: read up to 560 MB/s, write up to 300 MB/s Ultra high-performance and low power consumption

Superior User Experience

The MS800 mSATA Series SSD (solid state Drive) fully consists of semiconductor devices using NAND Flash Memory which provide high reliability and high performance for a storage media. The case-less mSATA design is significantly smaller than a 2.5-inch Hard Disk Drive. This design makes it ideal for small form factor computing platform such as notebooks.


High Reliability and Data Integrity Ensured
The MS800 mSATA Series SSD product electrically complies with the SATAIII standards and is electrically compatible with a serial ATA disk drive. In order to meet the high quality, the mSATA Series SSD products utilize Multi-Level Cell (MLC) NAND Flash Memory. Moreover, to ensure the data integrity, many advanced technologies are used such as dynamic bad block management, dynamic and static wear-leveling, and error correction code (ECC). The mSATA Series SSD drastically outperforms conventional Hard Disk Drives. In addition, the mSATA Series could also provide rugged features in industrial PC under an extreme environment with a high MTBF.

Interface:

mSATA

Capacity:

64GB~256GB

Dimension (mm):

50.8*29.85* 4.85

Weight:

<10g

Flash:

MLC 

MTBF:

2 million Hours

Operating Voltage:

5V ±5%

Power Consumption (Max):

0.28W (Idle) 3.18W (Active)

Operating Temperature:

0 to 70

Storage Temperature:

-40°C to 85°C

Humidity:

5 to 95%

[ATTO]Sequential Read (Max):

560MB/s

[ATTO]Sequential Write (Max):

300MB/s